Dimensions (L×W×H): 358 x 215 x 242mm,

Net weight (excluding accessories): approximately 21 kg

The AIO Pro 1200 comes with metal mounting fittings so you can assemble the 960wh battery, the Hyper 2000, into an all-in-one unit.

Yes, the AIO Pro 1200 has a built-in self-heating function that allows the battery to charge and discharge normally in environments as low as -20℃.

The AIO Pro 1200 has an aerosol fire suppression system for additional safety protection and provides protection against overheating, overcurrent, overvoltage, and short circuit. There is no risk of fire, ensuring reliable safety performance.

Yes. According to Section 12 of the German Value Added Tax Act (UStG), you do not need to pay VAT when purchasing the AIO Pro 1200.

For a better shopping experience, we recommend you visiting our German website to enjoy tax-free prices on your orders.

The AIO Pro 1200 has an 1800W MPPT input and a 1200W AC bidirectional inverter function. There are two ways to save money:
Method 1: During the day, AIO Pro 1200 converts the energy generated by the balcony photovoltaic panels into AC power for the home, and the excess energy is stored in the battery. If you have installed rooftop photovoltaics at home, combined with intelligent CT, the excess power generated by the rooftop photovoltaics can be charged to the battery through AIO Pro 1200. At night, AIO Pro 1200 will convert the power stored in the battery into AC for home use. Its outstanding power generation and energy use efficiency can effectively save electricity costs.
Method 2: By using time-of-use (TOU) electricity rates, the system saves on electricity costs by charging the battery when electricity prices are low and using the battery's energy when electricity prices are high.

AIO Pro 1200 has 4 PV input ports and can connect up to 4 groups of solar panels.

1. We recommended that the maximum power range for connecting the solar panel to each PV input is between 350Wp~600Wp.
2. Please note that the Voc (open circuit voltage) on each PV input must be lower than 55V.

Yes, it does. It supports connecting solar panels from other brands. Please note that the recommended power range for each PV input is 350Wp-600Wp, with a voltage range of 15V-55V. Please be aware that solar panels with input voltages exceeding 55V may cause permanent damage to the AIO Pro 1200.

AB2000 and AB2000S can be freely combined, with up to 3 stackable units, expanding the total capacity to 6720Wh

Yes, it does support charging the batteries via the household power grid, thereby preventing over-discharge of the batteries or storing excess electricity during off-peak periods, as well as surplus electricity from rooftop solar panels.

Yes, the AIO Pro 1200 device adopts intelligent anti-discharge technology.
1. Lowest SOC and sleep mechanism: When the battery level is as low as 5%, AIO Pro 1200 will automatically stop discharging. If the photovoltaic power generation is insufficient, the battery will automatically enter sleep mode; if the photovoltaic power generation is sufficient, it will recharge the battery.
2. Battery self-heating technology: Through this technology, the battery can be charged normally in the cold winter. When the battery temperature is below 0°C, the self-heating function will automatically start to run, and when it is heated to a certain temperature, the battery can be charged normally.
3. Support for charging the battery through mains power: When there is insufficient long-term solar power and the battery power is low, the AIO Pro 1200will automatically switch to mains power to prevent battery discharge. You can also manually switch to AC charging mode to charge the battery. Therefore, users do not need to worry that over-discharging will affect the battery life and the experience of using electricity.

ZenLink is a local communication technology that relies on power lines.
1. Enhancing communication stability: As long as multiple AIO Pro 1200s are connected to the home power network, they can immediately recognize each other and start communicating, unaffected by the stability of Wi-Fi connections, thus enhancing the stability of communication.
2. Phase identification: With this technology, it is unnecessary for an electrician to distinguish whether multiple AIO Pro 1200 devices are on the same phase. If they are on the same phase, they can automatically cluster and be controlled uniformly, saving a great deal of time and cost.

You can adjust the AC output power via the Zendure App.
- When the solar power generation exceeds the AC output power you set, AIO Pro 1200 will store the excess in the battery.
- When the solar power generation is lower than the AC output power you set, all the solar power will be supplied to the home, and the battery will discharge to meet the AC output power demand you set.
- At night, when there is no solar power generation, AIO Pro 1200 will use the battery to power the house.

AC Output power can be automatically adjusted through the smart sockets and CT supported by AIO Pro 1200. AIO Pro 1200 supports Shelly Pro 3EM, Zendure Intelligent Plug, Shelly Plus Plug S and Ecotracker from everhome.

Yes, it is normal for the device to experience a slight temperature increase during use. This will not affect the device's lifespan. The product has undergone rigorous testing and is equipped with overheating protection to ensure the safety of both you and the device. The device should not be touched by children or pets while it is operating.

For safety reasons, the AIO Pro 1200 will stop supplying power to the household after a grid power outage. However, it supports an off-grid operating mode. By purchasing the Zendure off-grid socket and connecting it to the AC interface of the AIO Pro 1200, your household electrical devices can be powered by plugging into this socket.

Yes, if the power of each of your solar panels is small (100W-350W), you can connect 2-3 solar panels in parallel at each set of solar connector. As long as the open circuit voltage (Voc) of each solar panel is between 15-55V, and multiple panels are in parallel, it can be used normally.

AIO Pro 1200supports three types of communication connections to ensure stable communication:
1. Wi-Fi 2.4GHz & 5GHz, you can choose the most stable frequency band to connect AIO Pro 1200 to the internet.
2. Bluetooth local communication; when there is no Wi-Fi signal, you can get close to AIO Pro 1200 and use the Zendure App to view and control AIO Pro 1200 via Bluetooth.
3. ZenLink, a way of local communication. It can support multiple AIO Pro 1200s to communicate with each other, unaffected by the stability of Wi-Fi connections.

Yes, the AIO Pro 1200 has obtained CERTIFICATION of VDE-AR-N 4105 (Germany) and CERTIFICATION of VFR 2019 (France), allowing it to be plugged directly into standard household sockets.

If the power usage does not exceed 800W, you can plug it into socket by yourself. If the output power used exceeds 800W, we recommend that you consult with an electrician for installation and adjustment.